Overhead Lifting Equipment 600t Shipbuilding Gantry Crane For Handling Workshop

Overhead Lifting Equipment 600t Shipbuilding Gantry Crane

Product Description:

1. Shipbuilding crane is one kind of the gantry crane, mainly for the purpose to assemble the boat.

2. This kind of shipbuilding gantry crane has the function of hoisting, handling, turn over in the air

    in section and so on, the height light function is to turn over and combine the task. Through the 

    two trolley to complete the turn in section, first through the hoisting to adjust it, then make trolley

    to bear the whole section.

3. The crane which used in the shipbuilding place and in the dock, its task just to transport all the 

     spare parts(fillet, structure steel, steel plate) to the fabricate place. This kind of transportation

     task must be completed during a very long travel.

Product Features:

1. The metal structure of the crane mainly includes main girder, rigidity leg, flexibility leg, lower

    horizonal girder, handrail and cabin, etc.

2. The main girder of the crane adopts double girder style, the four rails which are on the surface

  plate of the main girder can provide the traveling of the upper and the lower trolley, one crane 

  with two main hooks, and the hook traveling along the upper flange, and the other one has one hook

  and one auxiliary hook traveling along the lower flange, in case to turn and lift the big size boat.

3. To decrease the self-weight,the rigidity leg adopts the overall box type structure, the flexible

  leg adopts Chinese character "ren" type frame, including upper butt, two pieces round pipe 

  and lower butt.

4. The crane power supply adopts cable drum, the upper and lower adopts suspended cable tackle

  to provide the power, it locates on the top of the two main girders.

5. This crane equipped with overload protected, rail clamping device, anchoring device, wind speed

  and direction indicator and the other limit switch and load monitoring of each mechanism. 

Product Structure:

1. Main girder of gantry crane

    Be welded of steel plates with honeycomb hole,

    connected by high strength precision bolt.

    There is sliding rail for trolley to travel upper the girder

    which is fixed on outrigger by high-ten
Overhead Lifting Equipment 600t Shipbuilding Gantry Crane For Handling Workshop